Jun. 8, 2022
Of Bluetooth And Cremation - Part 2
From Part 1,
Leaving the highly contested and apparently non-beneficial effects of high frequency RF radiation aside, the next question is;
How does the human body suddenly start emitting RF radiation at frequencies hundreds of millions times faster than normal, with a readable code embedded into the signal?
Obviously there is something, an electronic construct within the body which generates this signal, but where inside a human body do you hide a Bluetooth enabled device? In early 2022 embalmers in Belgium were aware of the presence of this signal from many bodies and their own investigations show that whatever is generating the signal cannot be isolated during thorough examination of the body, although transmission continued throughout the dissection. Similarly they found no detectable (on a cell phone) signal emitted from the blood or other bodily fluids removed during the embalming process.
Although thorough in their dissections, what the embalmers did not do is subject the body tissue to high power magnification. Had they have done so they would have found what Japanese, German, Spanish and other researchers into this phenomenon have discovered; an assembled electronic network constructed of carbon and carbonaceous/metallic materials that concentrate in the major organs.
I told you it was a rabbit hole. However the assembled networks those researchers are finding are included in a recognized field of biomedical study and therefore in some ways have a precedent.
Fourteen years ago researchers at the Philips Research Laboratories, in Eindhoven, the Netherlands, had already developed semiconductor molecules that automatically arrange themselves in a layer just a few nanometers thick. The MIT technology review states that, “These “self-assembling” molecules could make it much easier to fabricate organic transistors, the essential building blocks of plastic electronics. In experiments, the researchers used the technique to make hundreds of transistors and arranged them into complex circuits.”
“The ultimate goal for self-assembled circuits “is to be able to throw molecules in a beaker and let them organize into desired structures,”
By 2016 a team at Rice University were publishing their findings on an electromagnetic means of conducting and accelerating this 'self-assembly' at a distance. They report that, “When hit by a field emitted by a Telsa coil, carbon nanotubes automatically arranged themselves into wires and also harvested enough energy to power LEDs.”
This process which they have named Teslaphoresis has the capability “to assemble and parallelize individual semiconductors on a surface en masse without any chemical template or lithography (which) could lead to its application for the scalable fabrication of high-density parallel nanotubes in computer processors or possibly bottom-up assembly of conductive nanotube fibers ...,"
"We're talking about building circuits without actually touching them," Carter Kittrell, a research scientist at Rice commented in a video released by the university.
According to the Rice team, “What this boils down to is essentially creating self-assembly for electronics and possibility of creating circuits, chips, and processors that can build themselves, not unlike a biological organism.”
Apparently the technology has developed since Rice's announcement and is now in use around the world. In January of 2021 two Chinese biomedical researchers published a document entitled; “Self-assembled magnetic nanomaterials: Versatile theranostics nanoplatforms for cancer” where in they state that,
“Self-assembled magnetic nanomaterials (MNMs) are a class of promising biomaterials possessing excellent physiochemical and biological characteristics, making them highly attractive in biomedical applications.
A myriad of magnetic nanosystems can be created by using self-assembly as a synthetic tool. Favorable nano-bio interfacial properties are shown in these promising self-assembled magnetic nanosystems, while still retaining their physical/chemical functionalities”
Their article does a good job of describing the process and it becomes evident that the assembly of a single, two or three dimensional construct within the body and using thermal energy and/or electromagnet fields as the catalyst is not that difficult.
Why? Why build a functioning electronic network inside of a human?
Medical care and research is the most predominant answer to that query, however that is a rather vague answer for such unique and invasive technology. We have all manner of non-invasive imaging and manipulation technology at our disposal, we have wearable and edible and insertable sensor technologies already so what benefits does creating an electronic network within us offer? To some people it would provide a panopticon of observation and control which is a current trend in business development.
According to the Bluetooth company they have established parameters for use of 'User Data Service' (UDS) sensors, nano-sensors, data storage, transmitters and receivers on and within the body. This link provides environmental and physical parameters for wearable and embedded technology and lists major bits of information that the system can collect, store, send and receive.
Most if not all of the information at the link above relates to information collection but what about the types of information, codes and instructions an embedded network can receive and carry out?
For some time we have known that electrical pulses to different parts of the brain can change a person's mood, affect their appetite(s), make them hallucinate and cause involuntarily muscle movement. We know that the electrical signalling controlling the Heart muscle is vitally important and any upset or shock to it will cause the heart to fibrillate or stop pumping completely. We know that generating an electrical frequency within our bodies of less than 50 Hz will degrade our health and mental abilities.
Decades of experimentation have shown us the intricacies of our bodies and our minds but that knowledge has given us the ability to read, mimic and manipulate both. Now we have in place the electrical signalling required to remotely induce, create and alter these and other molecular, genomic and cellular functions within the body while tracking both the body location and the results of these changes on the body.
How is it that this technology has found its way into the bodies of so many people?
As noted at the beginning of this post, only those who have received one or more mRNA vaccines/boosters transmit a MAC address. Similarly this phenomenon was not observed during 2020, the most serious year of the COVID outbreak and only began in 2021, several months after widespread mRNA vaccine roll out. This to me means the source of this self-assembling network is the mRNA vaccine.
Now I understand what the 'black goo' and 'metal contaminants' were in the recalled Japanese vaccines and I can no longer dismiss the plethora of reports and video on the finding of graphene, iron and other materials in lots of North American and European vaccines. In order for people to be emitting Bluetooth signals they would have had to have been injected with the building blocks of that system because current experience suggests that ingesting it otherwise won't get the materials where they need to be in the body. But it's early and the learning curve is steep.
Who did this to the two or three billion people who have trustingly followed health guidelines and been injected multiple times with an experimental gene therapy and self-assembling circuitry?
Can it be undone?
I don't have an answer to either of these questions although it would behoove us to investigate everyone promoting the vaccines to establish not only their motivations but more importantly an answer to the last question.